Skip to main content

Q: What are the lead times for orders?

A: During the process of glass bending, failures and/or breakages can sometimes occur, lead times are given in good faith but the postponement of delivery dates indicated by us cannot be ruled out, and should be taken into consideration when placing orders.

Q: How will my order be transported and delivered?

A: Where possible deliveries will be made packed loose on an SGP vehicle or on a wooden A-Frame for forklift unload only. Where vehicle restrictions apply and/or times or special packing may be required please state at quote stage to ensure correct pricing. Any requests for changes to delivery requirements may incur additional charges. 

Q: Are spontaneous breakages covered by warranty?

A: On very rare occasions, toughened glass can break spontaneously, without any applied load. This is due to small Nickel Sulphide inclusions that may be present in all float glasses. These breakages can occur months or even years after. Carrying out heat soak testing to the glass can reduce the risk of spontaneous breakage however this is not 100% guaranteed. Any spontaneous breakages are not covered by SGP warranty. 

Q: How should the glass be handled?

A: When handling the glass ensure that precautions are taken to handle safely, use suitable gloves and protective equipment as required. Care must be taken to ensure the glass is not impacted by any objects whilst being carried, particularly on the edges which are most vulnerable.

Q: How should the glass be stored?

A: Special care must be taken to protect the glass from impact damage, and the glass should be stacked on the edges. Place the glass on strips of wood or other suitable material which is relatively soft. Spacers should be applied to the surface of the glass to prevent face to face contact. Glass should be stored in dry conditions to avoid water staining before fixing, When fixed or stored the glass must be protected from site contamination.

Q: How do I maintain the glass?

A: When installed the glass should be cleaned regularly with Specialist Glass Products Ltd.’s glass and mirror cleaner as per the directions on the container. Sharp or abrasive products should not be used to clean glass. The use of oil based cleaners or applications must be avoided.

No job is too big or small for the team at Specialist Glass Products!

To discuss your requirements, get in touch with our friendly team today.

Whatever your specialist glass requirements, our team is here to help.

Let’s discuss your project today!

Contact Us